NanoTech Coatings Epoxy Paint

NanoTech Coatings Epoxy Paint is a high-performance product formulated from pure epoxy resins and is the strongest, longest lasting epoxy paint on the market. A superior corrosion, chemical and abrasion-resistant coating that will prolong the life of your surface for up to 10 years, NanoTech’s Epoxy Paint seals structural imperfections and hairline fractures from moisture, salt water exposure, rust, chemical degradation and aggressive atmospheres. 

For commercial, industrial, manufacturing and home-based applications, NanoTech’s Epoxy Paint dries into an impenetrable barrier that will protect your surface from corrosion, water damage, chemicals and staining. Applied via roller, brush or spray it’s an excellent “splash and spill containment” solution with easy cleanup and disposal that helps to prevent environmental contamination by safeguarding your surface against seeping and leaching chemicals. NanoTech Coatings Epoxy Paint can be made slip-resistant by adding sand to the composition and the color and finish of the paint can be adjusted to fit your specific needs. 

Once applied, maintaining the condition of your surface or floor is made easy by re-applying the product only in areas of high-traffic or significant wear. The low VOC proprietary composition of NanoTech Coatings Epoxy Paint is used as a specification standard for NASA flight-approved components and is fully compliant with California emission standards and regulations, exceeds military specifications and the American Water Works Association Standards (AWWAS). It’s the optimal choice for long-term, superior substrate protection with extended durability of 5-10 years.

Color: Concrete Grey, can be adjusted to fit your basic color needs.
Finish: Gloss, Semi-Gloss, Flat.
Application: Concrete, Fiberglass, Steel, Iron, Wood, Galvanized Metals, Aluminum, Uses: Concrete Surfaces, Machinery, Maintenance, Equipment, Marine Environments, Swimming Pools, Spas, Fountains, Water Immersion, Parking Garages, Warehouses, Service Stations, Ferrous Substrates in a Saltwater Environment.
Benefits: Stain, chemical and impact resistant, splash and spill containment, anti-corrosion, protection in aggressive climates and conditions, long term.
Dry Time: 6 to 12 hours / 4 to 12 hours for reapplication. Completely cured within 7 days, although film drying time may vary based on ambient temperature conditions.
Coverage: 380-400 sq ft per gallon at 2 mils thickness.

• 1 Gal
• 5 Gal